T8 product photography
Rooster Creative deliverable
Rooster Creative deliverable
tubulⒶRCH · Linear LED · T8
The Workshop T8
One dip-switchable lamp replaces 25 legacy fluorescent SKUs. 4FT G13 bipin. UL Type A+B hybrid — works with your existing ballast or bypasses it.
5
SKUs
25
Legacy replaced
10.5–18W
Wattage range
200+
Ballasts proven
UL TYPE A+B DLC PREMIUM ENERGY STAR BAA COMPLIANT
SKU consolidation
One lamp. 25 legacy fluorescent SKUs retired.
A single dip-switch on the lamp body selects wattage output. One part number handles every job from 10.5W to 18W.
25
Legacy fluorescent SKUs
→
1
Workshop T8 SKU
Dip-switch selection: Set wattage output in the field using the 4-position DIP switch on the lamp body. No tools required. Settings are printed on the lamp label.
Find My Tube
Tell us what you're replacing. We'll tell you exactly what to order.
Three questions. One SKU recommendation with dip-switch settings and rewire labor estimate.
STEP 1 OF 3
What fluorescent tube are you replacing?
STEP 2 OF 3
What type of ballast is in the fixture?
STEP 3 OF 3
What's your preferred install approach?
RECOMMENDED SKU
ALG-T8-4FT-15W-840-AB
The Workshop T8 · 4FT · 15W · 4000K · Type A+B Hybrid
Wattage setting
15W (DIP: 1-ON, 2-OFF, 3-OFF, 4-OFF)
Install type
Type A+B Hybrid
Rewire labor est.
0 min (Type A) or 8 min/fixture (Type B)
Ballast compatibility
Verified — 200+ ballasts
Structured specifications
Full spec data. Five sections.
Optical
| Parameter | Value | Notes |
|---|---|---|
| Lumens (delivered) | 1,600 – 2,200 lm | Varies by wattage setting |
| Efficacy | Up to 140 lm/W | At 15W setting |
| CCT options | 3000K / 3500K / 4000K / 5000K | Separate SKU per CCT |
| CRI | ≥80 | R9 ≥ 50 |
| Beam angle | 330° | Omnidirectional |
| MacAdam ellipse | ≤3 SDCM | Lot-to-lot consistency |
Electrical
| Parameter | Value | Notes |
|---|---|---|
| Input voltage | 120–277V AC | Universal voltage |
| Wattage settings | 10.5W / 12W / 14W / 15W / 18W | DIP-switch selectable |
| Power factor | >0.90 | All wattage settings |
| THD | <20% | At full load |
| Surge protection | 2kV | Per IEC 61000-4-5 |
| Inrush current | <20A peak | At 120V |
Type A (ballast-compatible) mode: lamp draws from ballast output. Type B (bypass) mode: lamp connects directly to line voltage. Both modes use the same lamp body.
Materials & Construction
| Parameter | Value | Notes |
|---|---|---|
| Tube material | Polycarbonate (PC) | Impact-resistant, UV-stable |
| End cap material | PBT thermoplastic | G13 bipin base |
| LED type | SMD 2835 | High-efficiency chip |
| Driver location | Internal (end cap) | No external driver required |
| Weight | 95g | 4FT lamp |
| Length | 1198mm (4FT nominal) | G13 bipin spacing: 26mm |
Environmental & Ratings
| Parameter | Value | Notes |
|---|---|---|
| Operating temp | -20°C to +45°C | Ambient |
| Storage temp | -40°C to +65°C | |
| Humidity | 10–90% RH non-condensing | |
| IP rating | IP20 | Indoor use only |
| L70 rated life | 50,000 hours | At 25°C ambient |
| Warranty | 5 years | Pro-rated after year 3 |
Controls & Compatibility
| Parameter | Value | Notes |
|---|---|---|
| Dimming (Type A) | Ballast-dependent | See ballast compatibility list |
| Dimming (Type B) | 0-10V / TRIAC / Phase-cut | Driver-integrated |
| Occupancy sensor | Compatible (Type A+B) | Programmed-start ballast for Type A |
| Emergency backup | Available (EM suffix SKU) | 90-min backup battery option |
NLC StandⒶRCH Sensor-Ready
The Workshop T8 (Type B bypass) is compatible with NLC StandⒶRCH /SR sensor-ready protocol. Enables occupancy and daylight harvesting without additional wiring. Specify /SR suffix SKU.
Documentation
Everything you need to specify and install.
Ready to specify The Workshop T8?
Quotes in 24 hours. Sample kits ship same day for retrofits ≥50 fixtures.